Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on while holding the button "Stop"

2. When the red indicator blinks shortly, the button must be released. After that the printer should be in the download mode

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (10-20 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (10-20 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (10-20 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (10-20 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (10-20 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (10-20 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (10-20 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (10-20 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (10-20 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (10-20 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (10-20 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip - a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer. 

And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (10-20 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (10-20 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (10-20 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (10-20 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Drag the firmware reprogramming file "ML1640_V1010060.fls" onto the file icon “usbprns2.exe”

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Attention!!

The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Open the folder "IgnorDev" and run file "fix1640_83.bat"

4. After that file has been run, a file "FIX_ML1640_V1010083.fls" should appear in the folder

5. Drag that file onto the file icon "usbprns2.exe"

6. Wait until the printer reprograms (1 minute) and restarts

7. After that the reprogramming process is finished, restart the printer

Attention!!

The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Open the folder "IgnorDev" and run file "fix1640_93.bat"

4. After that file has been run, a file "FIX_ML1640_V1010093.fls" should appear in the folder

5. Drag that file onto the file icon "usbprns2.exe"

6. Wait until the printer reprograms (1 minute) and restarts

7. After that the reprogramming process is finished, restart the printer

Attention!!

The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Drag the firmware reprogramming file "FIX_ML1640_v1_01_00_96.fls" onto the file icon “usbprns2.exe”

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Attention!!

The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer

2. When you turn the device on, hold the Cancel button until all lights begin flashing

3. Run the program through a file "f1660.exe" which is not in the folder

4. When the program has started, click on "V.30 patch firmware"

5. Afterwards in the folder a file is automatically created - "FIX_ML1660_V1.01.00.30.fls", "FIX_ML1665_V1.01.00.30.fls" or "FIX_ML1667_V1.01.00.30.fls" – the filename depends on the printer which it’s connected to

6. The created file needs to be dragged to the file icon "usblist2.exe"

7. Wait until the printer reprograms (1 minute) and restarts

8. After that the reprogramming process is finished, restart the printer

Attention!!

The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat" 

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1-2 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Drag the firmware reprogramming file "FIX_ML1661_V1.01.00.35.fls" onto the file icon “usbprns2.exe”

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Attention!!

The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat" 

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1-2 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat" 

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1-2 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip - a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer. 

And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip - a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer. 

And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on while holding the button

2. When the red indicator blinks shortly, the button must be released. After that the printer should be in the download mode

3. Then drag the firmware reprogramming file "FIX_ML1910_V1.01.00.82.fls" on the file icon "usbprns2.exe"

4. The reprogramming starts automatically

5. Wait until the printer reprograms (1 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Attention!!

The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat" 

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1-2 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on while holding the button

2. When the red indicator blinks shortly, the button must be released. After that the printer should be in the download mode

3. Then drag the firmware reprogramming file "FIX_ML1910_V1.01.00.77.fls" on the file icon "usbprns2.exe"

4. The reprogramming starts automatically

5. Wait until the printer reprograms (1 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Attention!!

The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip - a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer. 

And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip - a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer. 

And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Open the folder "IgnorDev" and run file "fix2240_83.bat "

4. After that file has been run, a file "FIX_ML2240_V1010083.fls" should appear in the folder

5. Drag that file onto the file icon "usbprns2.exe"

6. Wait until the printer reprograms (1 minute) and restarts

7. After that the reprogramming process is finished, restart the printer

Attention!!

The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Open the folder "IgnorDev" and run file "fix2240_93.bat"

4. After that file has been run, a file "FIX_ML2240_V1010093.fls" should appear in the folder

5. Drag that file onto the file icon "usbprns2.exe"

6. Wait until the printer reprograms (1 minute) and restarts

7. After that the reprogramming process is finished, restart the printer

Attention!!

The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Open the folder "IgnorDev" and run file "fix2245_84.bat"

4. After that file has been run, a file "FIX_ML2245_V1010084.fls" should appear in the folder

5. Drag that file onto the file icon "usbprns2.exe"

6. Wait until the printer reprograms (1 minute) and restarts

7. After that the reprogramming process is finished, restart the printer

Attention!!

The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Drag the firmware reprogramming file "FIX_ML2240_V1010096.fls" onto the file icon “usblist2.exe”

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Attention!!

The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "downl2520_49.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Attention!!

The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat"

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat" 

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat" 

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "dwn2580.bat" 

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

If a Xerox becomes a Samsung, it must be reinstalled!

Attention!!

The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Drag the firmware reprogramming file "FIX_ML-2855v.1.20.04.32.02.fls" onto the file icon “usblist2.exe”

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1-2 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Attention!!

The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Drag the firmware reprogramming file "FIX_2855_1010427.fls" onto the file icon “usblist2.exe”

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1-2 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Attention!!

The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!! 

1. Connect the printer to the computer and turn it on

2. Wait until the printer is ready for work

3. Run the file "download.bat" 

4. The reprogramming process starts automatically

5. Wait until the printer reprograms (1-2 minute) and restarts

6. After that the reprogramming process is finished, restart the printer

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip - a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer. 

And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip - a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer. 

And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip - a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer. 

And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip - a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer. 

And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip - a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer. 

And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip - a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer. 

And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip - a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer. 

And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip - a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer. 

And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip - a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer. 

And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.

Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer.

It is very important that under no circumstances should you remove the chip from the cartridge while reprogramming the firmware. After you have succesfully reprogrammed the printer, remove the chip from the cartridge and store it somewhere safely (the chip - a key). In all cartridges which you are going to use in the printer, the chip has to be either removed or sealed. If you have accidently inserted a new cartridge without removing the chip, the device will be blocked. In order to unblock it, you can use the stored chip as a key which help you to unblock the printer. 

And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT ports are disconnected. It’s preferable that the computer is connected to the "UPS" (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.